240FX/TK1 Technical Support
Online Technical Support from Bosch water Heaters
 
   Accessories

fxhood.gifFXHOOD 
The FXHOOD is a horizontal vent terminator with built-in freeze protection for AquaStar 125FX model.

It is required when installing the AquaStar 125FX model. See FX Hood dimensions & Vent terminal clearance (below).

*Note: The FX Hood is included with the purchase of an AquaStar 125FX.

240tstat.gif

 

 


240 TSTAT
The 240 TSTAT is a remote thermostat designed to adjust the output temperature of the AquaStar 240FX model. 240 TSTAT also can provide error codes to help aid in any problems that may develop.

   

FXHOOD rough cut opening is 10 1/8" x 10 1/8"

fxhood_dimensions.gif

  • The approved vent terminal must be installed so that flue gases will not jeopardize people, overheat combustible structures or enter into buildings, and so that proper clearances are maintained.
  • The vent terminal shall not be less than 7 feet above a public walkway.
  • The vent terminal shall terminate at least 3 feet above any (mechanical) air inlet within 10 feet.
  • The vent terminal shall not be within a 6-foot radius from a gas meter or regulator.
  • The vent terminal shall be a minimum of 6 feet from any combustion air inlet.
  • The vent terminal shall terminate from an opening window, at least 4 feet below or 4 feet horizontally from the opening.
  • The vent terminal shall terminate from a door, at least 1 foot above and 4 feet horizontally from the door.
  • The vent terminal shall not be less than 3 feet from an adjacent building.
  • The vent terminal shall not be less than 1 foot above grade.

fxhood_clearance.gif
   
240FX/TK1 Tech Support
 

Note: Specifications and product information subject to change without notice.